3
FEATURES
NOTES
• NEW DESIGNED DC MOTOR
Newly designed DC motor creates. 1.7kg torque and super fast start and brake within 1/4 rpm.
• ANTI SKIPPING TONE-ARM SYSTEM, TRACING HOLD BALANCE SYSTEM
The heavy-duty A. S. T. Stone arm is also newly designed for this model. Its stability and elaborateness enables non-skipping
performance in any occasion.
New designed A. S. T. S (Anti Skipping Tone Arm System) and TH (tracing hold) balance TONE-ARM system protect skipping
performance in hard scratching. And this TONE-ARM provide adjustment mechanism of tone arm height which Vestax Turn table
series have generally.
• ULTRA PITCH CONTROLLER
±50% Ultra Pitch ControI Fader allows DJs to be more creative.
• START & BRAKE CONTROL
Start & brake speed controI volumes are provided for new mixing technique.
• REVERSE PLAY
Reverse bottan makes platter spin backwards in one quick action.
• PROTECTION FOR FEEDBACK
The combination of the new A. S. T. S. tone arm and high-condensed ABS cabinet enables the highest resistance to the feedback.
• PDX-2000MkII Pro
In addition to the above-mentioned feature, the dynamic balance tone arm system is adopted.
By improving the trace performance of tone arm, playback sound quality becomes better and it makes playback possible even if the
disk have some curvature.
• Before detaching or attaching the headshell, be sure to turn the power of the amplifier or mixer off.
• Detaching or attaching of the headshell with the volume control turned up may cause damage to the speakers.
• Do not turn "ON" the power supply, with the turn table platter detached.
• When play is finished, be sure to secure the tone-arm with the arm clamp. After play is finished, if the unit is not to be used for
some time, care should be taken to secure the tone-arm to protect the stylus tip. For the same reason, the stylus protector should also
be attached.
• Wipe the headshell terminals from time to time. Dust and dirt at the headshell terminals may result in increased "HUM" noise or
intermittent sound. Use a soft dry cloth to clean the heashell terminals.
• Dust and dirt should be carefully removed from stylus tip or records. Dust and dirt on the stylus tip or record may not only result in
deterioration of tone quality, but also cause under wear of the record and the stylus tip itself.
• Transportation of the unit to distant places for removal and the like. Pack up the unit in there verse order to that for unpacking,
using the packing materials furnished when the unit was purchased. Should there be no such packing materials, be sure to take the
following steps. Remove the turntable platter together with the turntable mat, and wrap it up to prevent any damage to them. Return
the tone-arm to the armrest, and affix it with tape or the like. Remove the balance weight and the headshell/cartridge from the tone-
arm and then wrap them up to avoid and damage to them. Wrap up the turn table base with a blanket or soft paper also to prevent
any possible damage to it.
• ACOUSTIC FEEDBACK AND HUM
Acoustic Feedback is usually cause by vibration of speaker, which affects the sensitive cartridge.
If such a phenomenon occurs, relocate the turn table or speakers as far apart from each other as possible.
Hum is usually cause by near by appliances that use transformer or thermostat. Relocating be unit further away from the noise
sources will readily solve the problem. Hum may also be produced if the grounding wire extending from the unit is securely
connected to the GND terminal on the amplifier of mixer.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels